<< back <<
Location: >>Search by Application / >>Chemical Heating / Plating Solutions
Opened topped tanks and vats can be heated by either side entry type heaters or Vat heaters fitted to the top of the tank. Side entry heaters fitted to the base of the tank tend to be more convenient as the elements and terminal enclosures are less likely to be damaged or become obstructive to the use of the tank. Fixed element type heaters such as our WR and WF ranges can be specified by our technical department for this application. Removable core type heaters are more robust and less likely to get entangled in objects being inserted into the tank. Please refer to our HO, HF and OD ranges.
Top entry Vat heaters (RV range) are easier to install and remove. It should be noted that only the contents of the tank above the heating elements will be heated. It is therefore important to remember that any top entry type heaters should have elements that reach the bottom of the tank.
Where it is advantageous not to have any elements in the tank then flow heaters would be recommended.
There are 6 Results:
• 'RV' Vat Heater/Open Topped Tank Heater
Vat heater with a range of loadings from 1kW to 30kW depending on the solution to be heated. Option of fitting a control thermostat within the terminal enclosure. An over-temperature safety thermostat can be mounted separately. Models suitable for a wide range of caustics and chemical solutions.
• 'WR' Screw In, Fixed Rod Element Heater
Single and three phase immersion heaters ranging from 1kW to 24kW in 1" to 2½" BSP. Suitable for calorifiers, water cylinders, industrial and outdoor applications.
• 'HO' Screw In, Removable Core Element Heater
Single and three phase immersion heaters ranging from 1kW to 3kW in 2½" BSP as a standard range. Higher kW loadings can be supplied. The standard range is specifically designed for heating oils and caustics and can be used to heat various chemical solutions.
• 'OD' Flanged, Removable Core Element Heater
Three phase immersion heaters ranging from 6kW to 24kW. A bank of 6 elements is fitted horizontally on a rectangular flange. The standard range is specifically designed to heat water and caustic solutions and can be used to heat various chemical solutions. Suitable for plating tanks, rinse tanks, etc.
• 'WF' Flanged, Fixed Rod Element Heater
Single and three phase immersion heaters ranging from 1kW to 24kW and fitted with fixed elements. Suitable for calorifiers, water cylinders, industrial and outdoor applications.
• 'HF' Flanged, Removable Core Element Heater
Single and three phase immersion heaters ranging from 1kW to 3kW as a standard range. Higher kW loadings can be supplied. The standard range is specifically designed for heating oils and caustics and can be used to heat various chemical solutions.